Regulation Compliant Trade Waste Arrestors that are installed in days instead of weeks or months.
If you are looking for versatile tanks that can handle heavy traffic zones, are built to last, and are approved by local Australian state regulations, then you need to know about what Australian Tanks can offer you and your project.
Here’s what you can expect if you decide to use our tanks for your job:
Complete Compliance with New South Wales and Queensland State Regulations
If you choose to use Australian Tanks for your project, you don’t have to worry about compliance issues.
We’ve worked closely with the Trade Waste Authorities so that our arrestors fit the state regulations.
The hard work is already done for you. With our tanks, you will not have to deal with the hassle of government regulations, because our tanks are already pre-approved.
Reduced Risk with the Extra
Our tanks are designed to operate unaffected in high traffic areas. They are rated to bear heavy vehicle access, based on fully laden semi-trailer loads.
What this means for you is that when the trade waste arrestor goes in the ground, you will be far less likely to have to unearth it again for repairs or replacement. Our tanks have a reinforced baffle design, so they are more durable than other pre-cast options.
It’s a common thing for tanks to be damaged if they aren’t built for high trafficability, so to counter the risk we’ve designed our tanks to be as robust as possible.
The full range of our trade waste arrestors are anti-floation designed, with no additional ballast required for installation.
All of our tanks are also coated with Megapoxy MC, a heavy-duty protective coating. It protects the concrete against chemicals, foodstuffs, fuel and is resistant to impact and abrasion.
"Successful installation of several large capacity grease interceptor traps that are fully compliant with the City of Gold Coast Trade Waste Department requirements."
Platinum Hydraulic Design are proud to be collaborating with Christopher Contracting Plumbing & Drainage for the new Westfield Coomera Shopping Complex Development.
Throughout the design phase, we were faced with particular challenges to overcome local authority requirements pertaining to the grease interceptor traps. Australian Tanks welcomed these challenges, and set out to provide a bespoke solution to the issues.
The professional manner in which Australian Tanks approached this project resulted with the successful installation of several large capacity grease interceptor traps that are fully compliant with the City of Gold Coast Trade Waste Department requirements. Congratulations to Henry Hape, Les Green and Team for the professionalism, and a quality product.
Platinum Hydraulic Design
Unrivalled versatility when it comes to our tanks
Our tanks can range from 1000 litres to the maximum capacity being 16,000 litres in a single tank.
We manufacture grease trap arrestors, lint arrestors, silt arrestors, cooling arrestors, and acid neutralizing arrestors.
All the different capacity tanks are approved by state regulation, all the way up to the largest 16,000 litre size tank.
Our tanks have the option of swat or deep invert applications as well.
Whatever specific demands your project has, we’ll have a solution within our range of arrestor tanks.
10-year warranty and 50-year design life
Our tanks come with a 10-year warranty that covers the structural integrity of the concrete tanks, lids, and manhole covers.
The tanks themselves have a 50-year design life. We know the quality of our tanks, and we know what to expect of them. We’ve designed these tanks to be durable and to last year after year. With proper maintenance, a 50-year design life is what you expect from our tanks.
Cut down on costs and unexpected expenses
What the combination of the above advantages means for your project is that costs will be reduced in the short-term and the long-term.
Because of our pre-cast anti-flotation design, the tanks are installed within a few days instead of a month or two. There’s no need to deal with concrete trucks, water trucks, or additional site personnel.
If you ask any of our previous clients, they’ll say how impressed they were with the speed of the installation.
You’ll also be future-proofing yourself with our tanks because they have 50-year design life. They’re extra durable and can handle heavy traffic without suffering any sort of structural compromise.
We really believe that our tanks offer the most cost-effective and logical solution for most site managers.
Recent ATQ Trade Waste Arrestor Projects
Over the past three years Australian Tanks has developed and refined
an EASY, FAST & COST EFFECTIVE solution to Trade Waste Arrestors
Have a talk with us if you want to find
out more about our waste arrestors
If you’re needing reliable trade waste arrestors for a current project or an upcoming one, then have a talk with us.
We at Australian Tanks have worked on multiple projects and have overcome a wide range of different circumstances and challenges.
Our tanks are built to last, are ultra-durable, and are approved by state regulations.
If that’s what you think you need for your current project, then book a call below, and one of our team will be in touch.
It doesn’t cost anything and will be the quickest way to find out if we can help you with your project or not. We can answer any questions we haven’t answered here and address the specific circumstances of your current project.
Just book below.
Contact us today for expert advice for your application.