Channon Street, Gympie, Qld

Civilivic, Stormwater Detention

The Challenge

Situated beneath a shared driveway, this 42,000L stormwater detention site presented multiple requirements in project time and cost efficiencies. The site could not be shut down for two weeks for anin-situ solution, therefore an anti-floatation and heavy duty trafficable Australian Tanks precast solution with a one-day install time was the most efficient process available.

The Solution

  • Six (6) precast 7000L tanks,
  • Stormwater Detention System
  • Fully installed in five (5) hours, ten (10) minutes

The Results

  • Arrival onsite at 9:45am
  • Fully installed by 2:55pm
  • Anti-floatation
  • Trafficable by a fully loaded semi-trailer, based on the SM1600 design load rating
  • Onsite efficiencies and project savings

Products

  • Australian Tanks 7000L (x 6)
  • Inter-connectable precast tanks
  • All penetrations, risers and access frames
  • All sealant supplied for installation
22 Kiln st, Darra, Qld
Australian Tanks teamed up with CIP to design and install 30 Parthenon modules at 22 Kiln St, Darr, Queensland.
The storm-water detention system was to be installed in the driveway and would impact access to the site to a fast and effective solution was required.
Kiln St, Darra
Australian Tanks teamed up with Hutchinson Builders and ADG Engineering to install 1.4 Million litres of stormwater detention at Kiln St in Darra Queensland.
Tile Street Detention system
Australian Tanks teamed up with Vaughn Construction and VTCE to provide an on-site detention system that met the filtration requirements.
Residential development – Denman Prospect ACT
A unique hybrid installation combining both water retention and water detention.
Coomera Town Centre South
Australian Tanks teamed up with Civil 360, Golding Contractors and Foxwellat the new Coomera Town Center South, 64 Foxwell rd, Coomera.
Beavis & Bartels Pty Ltd
Project required 150,000L water storage for reuse at the Aldi Brendale distribution centre truck wash bay.

All our product specs any time.

Are you planning for an upcoming project? Our Engineer’s Hub can help you find the product you need, quickly and easily.

Every detail is here for you when you need it, at your own leisure, to help you discover what is the right fit for your project.

Gain access to all the required plans to determine which product meets your needs and be able to specify the solution into your design with downloadable CAD drawings.

Complete access to all our documents